Bru'n Water and pH

9 posts / 0 new
Last post
Jim Vondracek
Jim Vondracek's picture
Offline
Last seen: 1 week 2 days ago
Alchemist, member since
Bru'n Water and pH

Some folks are reporting issues with Bru'n Water's pH predictions https://www.homebrewtalk.com/forum/threads/problems-with-bru-n-water-ph.... I don't have any insight into this, I use the BeerSmith pH calculator, but I know some CHAOSers use Bru'n Water and might want to look into this.

Brandon Kessler
Brandon Kessler's picture
Offline
Last seen: 2 years 8 months ago
Alchemist, member since
Thanks for posting, Jim

Thanks for posting, Jim

I just read through that whole thread and this is my conclusion:

1) The person who started the thread swears he’s using pure RO water

2) He’s never actually sent his water to get it tested, so he doesn’t really know what he’s starting with in the 1st place (pH wise)

So, take it with a grain of salt. 

jaygowdy
jaygowdy's picture
Offline
Last seen: 1 year 9 months ago
Alchemist, member since
So that's why I keep missing

So that's why I keep missing my target pH....

Jim Vondracek
Jim Vondracek's picture
Offline
Last seen: 1 week 2 days ago
Alchemist, member since
Interestingly, he's used

Interestingly, he's used multiple brands of RO water.

Kyle N
Kyle N's picture
Offline
Last seen: 1 week 6 days ago
Alchemist, member since
I have been high my last few

I have been high my last few brew days, myself. With no playoff hockey tonight, I'll have plenty of time to check out a few different calculators and see what they all say. 

@Brandon: starting water pH really isn't all that important. It's the mineral content (as you also allude to) - but in this case I'm willing to take that grain of salt and believe that he's starting with at least very close to RO water, meaning that the effect of the grist should be far greater than the effect of the water on the resulting mash pH. 

 

Brandon Kessler
Brandon Kessler's picture
Offline
Last seen: 2 years 8 months ago
Alchemist, member since
I think there's too many

I think there's too many variables involved to get the exact pH you're targeting every time.. As long as it's close. But this guy's results are not close at all. 

When you say you've been high Kyle, how high are we talking? 

Kyle N
Kyle N's picture
Offline
Last seen: 1 week 6 days ago
Alchemist, member since
Varies depending on grist,

Varies depending on grist, but 0.3 - 0.4 pH units high (which is high). 

It could be my measuring (I use the gradations on my plastic pipette which probably aren't accurate), and could also be my starting water volumes (same logic).  We'll see what happens Thursday. 

Matt Kopecki
Matt Kopecki's picture
Offline
Last seen: 3 years 9 months ago
Something that's tripped me

Something that's tripped me up in the past: my calibration solutions were old, so my pH meter set-points were off. They sell those solutions in single use packets which I previsouly had thought were a silly waste, but now I'm not so sure.

Rich
Rich's picture
Offline
Last seen: 1 week 2 days ago
Alchemist, member since
I apologize for this one in

I apologize for this one in advance........but maybe you should wait to get high until after you have your water figured out....laugh