New Keg / Carboy washer

9 posts / 0 new
Last post
JamesFaircloth
JamesFaircloth's picture
Offline
Last seen: 19 min 3 sec ago
Brewer, member since
New Keg / Carboy washer

 

whoever built this.....

BRAVO!!!

Great build.

 

Brandon Kessler
Brandon Kessler's picture
Offline
Last seen: 3 hours 16 min ago
Alchemist, member since
For the bucket crew (myself

For the bucket crew (myself included) your new pump is coming this weekend so you'll be able to use the old white trays (the only thing wide enough to support buckets). Also, the ability to switch to the CIP ball that Reed bought to either pump will also be available).

 

 

 

roussel
Offline
Last seen: 2 days 19 hours ago
Alchemist, member since
Should I buy more of the

Should I buy more of the screw on tops so all posts can be interchageable?

 

 

Brandon Kessler
Brandon Kessler's picture
Offline
Last seen: 3 hours 16 min ago
Alchemist, member since
Not unless we get more CIP

Not unless we get more CIP balls, which I don't think is necessary.  Or is it? 

roussel
Offline
Last seen: 2 days 19 hours ago
Alchemist, member since
If we make them all screw on

If we make them all screw on we can movethe cip ball or normal sprayer at will, so if we have two trays set up you can just move the cip ball bewteen them 

Brandon Kessler
Brandon Kessler's picture
Offline
Last seen: 3 hours 16 min ago
Alchemist, member since
So we now have 3 good working

So we now have 3 good working pumps - 2 for the carboy/keg washers + 1 for the traditional white tray. 

The pump for the white tray + 1 pump for the carboy/keg washer has an interchangable screw-off head to accommodate the use of the CIP if desired.

roussel
Offline
Last seen: 2 days 19 hours ago
Alchemist, member since
Thanks again

Thanks again

Jeff W
Jeff W's picture
Offline
Last seen: 1 day 4 hours ago
Alchemist, member since
Thanks, Brandon!

Thanks, Brandon!

Rich
Rich's picture
Offline
Last seen: 39 min 17 sec ago
Alchemist, member since
Worked great, thanks Brandon!

Worked great, thanks Brandon!